entry without a pause between the prefix numbers. You may have to dial 011- RD./P, dial 886 - RD./P. This allows adequate timing for the phone number to register with the telephone company's system and complete the call.
7.Memory Dialling
A. Two-touch memory
To store a number in two-touch memory
You can store 10 numbers in
NOTE: If you want to update the stored number, you need to store a new number to replace the old one.
To dial a number from two-touch memory
Lift the handset or press the 
button, press the AUTO button, then press the desired location button(0~9) to dial the number.
To review a number in two-touch memory
In the state of
B. One-touch memory
To store a number in one-touch memory
In the state of
Or
Enter the number you want to store at first, then press and hold the desired location button (M1~M3) until the LCD shows SAVE OK. NOTE: If you want to update the stored number, you need to store a new number to replace the old one.
8
4. LANGUAGES SELECTING
The unit support multi languages, including English1, Greek, Australian, Czech, Slovak, Turkish, English2, Spanish, Dutch, French, German, Polish, Swedish, Danish, Finnish and Norwegian.
Press the 
button when the LCD shows SET LANGUAGE to enter the languages setting. Use 
or 
button to select the language. Press the 
button to confirm and exit.
5. AREA & LONG DISTANCE CODE SETTING
(Only under "English1", "English2", "Greek", "Australian", "Czech", "Slovak", "Polish" and "Turkish" language and in
When you use this phone for the first time, or move to an area that has different area code, you must enter your area code. This is necessary because the phone must distinguish local or long distance calls to properly dial calls from the Caller ID list.
1.Press the 
button when the LCD show SET AREA & LDS to enter the setting.
2.Press 
or 
button to select the correct digit.
3.Press the 
button to confirm and enter the next digit setting.
4.When the area code setting has been completed, press the 
button to confirm and the LCD displays SET LDS CODE. The unit
enters the long distance code setting.
5.Repeat the step 2~3 to finish the setting for LDS code and press
the DEL button to exit.
For example: If you set the long distance and area code 0592, and the incoming number is 05926036442. When you call back the number, the LCD only show 6036442.
13