Using the call back feature(NOTE: If the number is blocked or is not available, it can not be call backed.)
A. Call back the dialled number: The unit can store up to 10 dialled
numbers.
1. In the state of 
button once, the last dialled number will show on the LCD, then use the 
or 
button to select the
number that you want to dial out.
2. Pick up the handset or press 
button, the phone number can be dialled out automatically.
B. Call back the called number: The unit can store minimum 76 called numbers.
1.Lift the handset or press 
button, listen for a dial tone.
2.Select the caller that you want to call back by pressing the 
or 
button.
3.Press the 
button to dial the phone number shows on the LCD . Or
In the state of 
or 
button to select the call you want to call back, then pick up the handset or press the 
button, the phone number can be dialled out automatically.
INTRODUCTION
CHECK THE CONTENTS OF THE BOX
Box should contain:
Handset with handset cord and phone base
Telephone line cord
4 AA size 1.5V batteries
User's manual
Bracket
BATTERY INSTALLATION
The Caller ID phone requires four 1.5V AA size batteries for LCD display.
1.Remove the battery cover from the back of your Caller ID phone
2.Insert four 1.5V AA size batteries by observing the +/- polarity marked in the compartment.
3.Replace battery compartment cover.
NOTE: You can also insert an adaptor for the LCD display (optional).
CONNECTING LINE CORDS
Plug one end of the supplied modular cord into the line jack. Then plug the other end into telephone line jack.
18 | 3 |