Function Buttons

6. FLASH TIME SETTING

Press the button to enter this setting when the LCD shows SET FLASH and then the current value will display.

Use the or button to set the flash time (100ms/120ms/300ms/

600ms). Press the button to confirm and exit.

7. HOUR FORMAT SELECTION

Press the button to enter this setting when the LCD shows HOUR FORMAT and then the current value will display.

Use the or button to select the hour format (12H/24H). Press

the button to confirm and exit.

8. DATE FORMAT SELECTION

Press the button to enter this setting when the LCD shows DATE FORMAT and then the current value will display.

Use the or button to select the date format (DD-MM/MM-DD).

Press the button to confirm and exit.

In the DD-MM mode, the time display sequence is day-month and in the MM-DD mode, the sequence is month-day.

1. Ringer Volume Selection

Set the ringer volume switch to the desired position ( HI/LO ) to select the ringer volume. To have the maximum ringer volume, move the ringer volume switch to the HI position. If you would prefer a gentle ringer volume, move the ringer volume switch to the LO position.

2. Redial Function

Lift the handset or press the button, then press the RD./P button to redial the last dialled number.

3. Speaker Function

To switch your call to speakerphone, press the button and hang up the handset. To revert back, just pick up the handset. In speaker state, you can dial the number and receive the call, also you can answer the call.

4. Flash Function

Press the FLASH button to terminate a call and institute a dialling tone for another call or to get another call from "Call Waiting" (a special telephone service).

NOTE: If you do not have any special telephone service, such as Call Waiting, pressing the FLASH button during a call may disconnect your current conversation.

5.Mute Function

If you wish to speak privately to someone else in the room without your caller overhearing, press the MUTE button once then the LCD will display MUTE. To resume normal conversation, just press the MUTE button again.

6. Pause Function

Allows you to insert a temporary pause during dialling sequence. For example, dialling an international number (eg: 011-886-22-795-1234), some telephone company systems will not register the entire number