Profoon Telecommunicatie PDX-1000 manual Memory, Call Transfer / Toggle / Consultation

Page 9

MEMORY:

The memory of each handset of the PDX-1000 series has a capacity of 10 telephonenumbers of maximum 20 digits each.

Programming:

1.key in the number through the keyboard and press

2.press one of the 10 key’s (0-9) of the keyboard

Dialing:

1.press and press the key under which the number is stored (0-9)

2.press

3.the number will be dialed

Pause:

In case you are connected through a PABX, a waiting time must be inserted direct after the prefix number. Press and keep it pressed until after one second a “P” comes in the display.

CALL TRANSFER / TOGGLE / CONSULTATION:

This feature is only available when you purchased a PDX-10xx telep- hone with multiple handsets.

1.during the conversation press and keep it pressed until after one second the internal dialtone is heard, the CO line will be put on hold

2.dial the internal number of the other handset

3.as soon as the other handset answers the call, you have the following options:

Call transfer:

press

to transfer the CO line to the other handset

Toggle:

by pressing button for one second, you can toggle

 

between the other handset and the CO line

Consulting:

press

after you have consulted the other handset

 

and keep it pressed for about one second to return to

 

the CO line

In case the other handset does not answer your call, press to return to the CO line.

9

Image 9
Contents PDX-1000 Series Page Safety Information Introduction Declaration of NetworkcompatibilityDeclaration of Conformity Table of Contents LCD Display on the Handset Your TelephoneInstallation Usage Incoming Receiving VolumeOutgoing On HookCall Transfer / Toggle / Consultation MemoryCALLER-ID IntercomCall Transfer and NETWORK-SERVICES TeleservicesPaging the Handsets OUT of RangeSettings Ringer FlashtimeSystem Failure Restore Default Function ProcedureMaintenance HOW to ACT Guarantee CardGuarantee Expires CustomerPage 0681