Installation with a Single Computer

SOYO G668 Ethernet IP Phone User Guide

Installation

Depending on your network environment, you will need to perform one of the following installations:

Installation with a Single Computer Installation with a Home or Office Network

Installation with a Single Computer

Note: Some Internet Service Providers provide only one public IP address. Therefore the computer and the IP phone can NOT be online at the same time. Using a router is highly recommended.

Broadband

Modem

Ethernet port

Computer (Optional)

Ethernet port

WAN LAN

IP Phone

1.Connect one end of the Ethernet RJ-45 cable to the broadband modem, and connect the other end of the cable to one of the RJ-45 WAN ports at the rear of the G668 IP phone.

2.Connect one end of another Ethernet RJ-45 cable to your computer, and connect the other end of the same cable to the LAN ports at the rear of the G668 IP phone. (This is an optional step. IP phone can work without the computer)

3.Connect the power adapter to the AC outlet and the power jack at the rear of G668 IP phone.

4.Once the IP Phone is powered up, the booting sequence will begin. You will see the following information displayed on the LCD screen: