SOYO G668 Ethernet IP Phone User Guide
Booting …
È
DHCP
Connecting …
È
Ready For Calls
SOYO_Group
5.If “Ready for Calls” appears on the LCD screen as shown above, your IP phone is ready to use. Now you can pick up the hand set and start making phone calls. Important: It may take about 20 seconds for the phone to initialize during setup, please be patient and wait till the initialization completed.
6.If you are using a DSL modem and the LCD screen displayed “Wait Logon…” or “Logon Failed”, you may need to enable the PPPoE setting on your IP phone as described in “Configuration for PPPoE” section on page 12.
7.If you are using a static IP for the phone and you see “Wait Logon…” on LCD display, you may need to change the IP setting on your IP phone as described in “Configuration for Static IP” section on page12.
8.If you still have problems logging on, please refer to “Troubleshooting” on page 20. If problem persist then contact your VoIP provider.
8