TOPCOM OGATECH
If no outgoing message is recorded, a
7.1.1 Setting the base speaker volume
To change the volume during playback of incoming or outgoing messages, press 
to increase or 
to decrease. The volume can be set from
7.1.2 Turning Answering Machine On/Off
If the answering machine is On, the 
If the answering machine is Off, the 
-LED
•Press 
to switch On the answering machine.
•A voice confirms the setting and playback the active OGM.
•Press 
to switch Off the answering machine.
Even if the answering machine is Off, it will automatically pick up after 10 rings to enable remote activation (See 7.3 “Remote Operation” )
7.1.3 Setting Number of Rings
The number of rings after which the answering machine will answer calls can be set from
2 – 9 and TS (Toll saver). The standard setting is 6 rings. In Toll saver mode, the machine will answer after 6 rings if there are no new messages, and after 2 rings if there are new messages. If there are no new messages and you call your machine to check your messages remotely ( See 7.3 “Remote Operation” ), you can hang up after the 2nd ring. You do not need to pay connection fees and you know that you do not have any new messages.
•To check the actual number of rings, briefly press the ‘skip forward’
button. A voice will playback the current number of rings.
•Press 
for 2 secs to set the number of ringing tones.
•Press immediately 
to change the current number of rings.
•If you do not press any keys for 3 seconds, the machine will set the selected number of rings.
7.1.4 Day and time setting
•Press and hold the 
•Press the 
or 
to change the day and press the 
•Press the 
or 
to change the hours and press the 
•Press the 
or 
to change the minutes and press the 
If the day and time are correctly entered, the unit will anounce the new setting.
ENGLISH
TOPCOM OGATECH | 25 |