Connect the SX6P to AC Power
1.Connect the barrel connector of the power supply to the AC power input on the rear panel of the SX6P - see Figure 11.
2.Plug the AC power cord into the power supply.
3.Plug the AC power cord into the wall socket.
4.Press and hold the ON/OFF button for 3 to 5 seconds.
5.Check the cellular signal strength and move the unit until the best signal possible is achieved - see the Service Indication section of this manual.
AC Power |
|
|
| Barrel | |
Input |
| Connector |
|
|
|
Wall Socket
AC Power Cord
Power Supply
Figure 11 – SX6P AC power connection.
Phonecell® SX6P GSM | 4 | User Manual |