CALL FUNCTIONS
Making Calls
1.Pick up the handset or press the SPEAKERPHONE key. The SX6P is now
2.Listen for dial tone.
3.Dial the phone number. The dialed number will be displayed. The name will also be displayed if it is stored in the phonebook.
Correct Dialing Errors
•To erase one digit, press the CLEAR key once.
•To erase all digits, press and hold down the CLEAR key until all digits are erased.
•To insert numbers, use the arrow keys.
Redial the Last Telephone Number Dialed
1.Pick up the handset or press the SPEAKERPHONE key. The SX6P is now
2.Press the REDIAL key.
Receiving Calls
When there is an incoming call, the SX6P rings, an incoming call notification displays the call type and Caller ID information (if available).
1.Pick up the handset or press the SPEAKERPHONE key.
2.Begin talking.
NOTE: Press the REJECT key to refuse the call. The phone will stop ringing and the calling party will be disconnected.
Receive a Call When Caller ID is Activated
The Caller ID feature displays the caller’s number when the SX6P rings. If the caller’s name and number are stored together in the SX6P phonebook, the caller’s name and number will be dis- played. Contact your service provider to activate this feature.
NOTE: If there are missed calls (calls not answered), “MISSED CALLS” will be displayed with the number of calls missed. See
the Call Logs section of this manual for more information.
Ending Calls
Hang up the phone by either placing the handset back onto the SX6P cradle or press the SPEAK- ERPHONE key if using the speakerphone.
In-Call Functions
Mute a Call
1.While in a call, press the MUTE key. A notification will display in the upper right corner of the LCD screen.
2.Press the MUTE key again to
Place a Call on Hold
1.While in a call, press the HOLD key.
2.The display will change from Active to Held.
3.To reactivate the call, press the HOLD key again.
Adjust Volume
1. While in a call, press the Volume keys to raise or lower the handset/speakerphone volume.
Phonecell® SX6P GSM | 7 | User Manual |