Wall-Mounting
1.Remove the mounting clip from the cradle and
Figures 7 and 8.
Mounting Clip in Cradle (tab up)
Remove Mounting Clip from the Cradle (tab down)
Insert Mounting Clip into the Cradle (tab up)
Figure 7 – Handset mounting clip assembly. | Figure 8 – Handset mounting clip for |
2.Mark two hole locations 83 mm
3.Install the screws (not supplied) into the wall, leaving a gap of approximately 3 mm (1/8 inches) between the screw head and the wall.
6.Align the mounting holes with the screws and mount the SX6P onto the screws - see Figures 9 and 10.
83 mm
Mounting Holes
Figure 9 – SX6P mounting hooks. | Figure 10 – Mount the SX6P onto the screws. |
Phonecell® SX6P GSM | 3 | User Manual |