Telular SX6P-300G, SX6P GSM Call Settings, Minute Minder, Call Timer, Dial Delay, Auto Dial

Page 20

Call Settings

Minute Minder

When turned on, the Minute Minder emits a low audible tone once every minute while a call is active.

1.Press the MENU key.

2.Select Settings, then select Call Settings.

3.Select Minute Minder, then select On or Off as desired.

Call Timer

When turned on, the Call Timer displays during an active call. It can be set to remain visible for 30 seconds after the call is terminated or until another action (key press or taking SX6P off-hook).

1.Press the MENU key.

2.Select Settings, then select Call Settings.

3.Select Call Timer, then select the desired option. Options include:

Off - no call timer displayed.

On For 30 Sec. - call timer is displayed for 30 seconds or until user action.

On Until Action - call timer is displayed until a user action.

Dial Delay

The Dial Delay is the amount of time, after a digit is dialed, the SX6P waits before automatically sending the call.

1.Press the MENU key.

2.Select Settings, then select Dial Settings.

3.Select Dial Delay.

4.Use the arrow keys to change the delay time(2 - 20 seconds).

5.Press the OK key.

Auto Dial

The SX6P is able to recognize frequently called numbers and automatically dial them without wait- ing for the Dial Delay. Once a number has been called twice successfully, it will Auto Dial when this option is turned on.

1.Press the MENU key.

2.Select Settings, then select Dial Settings.

3.Select Auto Dial.

4.Select On to enable Auto Dial.

Phonecell® SX6P GSM

14

User Manual

Image 20
Contents Phonecell SX6P GSM Phonecell SX6P GSM SX6P Menu Structure Important Notices ContentsSafe Operation Instructions Table of Contents Supplementary Services Network Dependent Install Batteries optional SX6P SetupSIM Card Installation Connect the Handset Location and SetupBattery Operation Wall-Mounting SX6P mounting hooksConnect the SX6P to AC Power SX6P AC power connectionFunction Keys Speakerphone Engages the speakerphone featureGetting to Know Your SX6P Service Indication LCD Screen IconsCall Functions Making CallsReceiving Calls Ending CallsAudio Settings SX6P Basic FeaturesDate and Time Settings Adjust Alert Tones Ringer SpeakerphoneKeypad Buttons for Text Entry Multitap Enter a Hard PauseUse of Lower Case or Numbers Use Special CharactersChange Backlight Options SX6P-300G Series Only Speed DialingChange the Display Screen Contrast Call Logs SX6P Additional FeaturesAlarm Settings Language Selection Personalization OptionsCall Settings Call TimerDial Delay Minute MinderNetwork Settings SIM PIN Setup Change SIM PIN1 Change SIM PIN2Bar All Incoming Calls Bar All Outgoing CallsRestricted Dialing Deskphone LockRestore Factory Defaults Closed User Groups CUGCall Divert Forwarding Supplementary Services Network DependentIn-Call Options Caller ID Settings Call WaitingMultiparty Calling Blocking Your Number ClirShort Message Service SMS VoicemailForward Text Messages Delete Text MessagesCreate Text Messages View Saved MessagesInformation Messages Network Call Barring Activate Call BarsDeactivate Call Bars Check Call Bar StatusAutomatic Baud Rate Fall Back Control Configure PC for Circuit Switched DataConnect SX6P to a Computer Gprs Packet Data Connections Digital Fax SetupBaud Rate AT Commands SX6P Troubleshooting Safety Information Conformance StatementsFCC Part 15 Class B Compliance Exposure to RF Radio Frequency EnergyTemperature Environment Antenna Care and ReplacementSafe Operation Requirement DrivingPotentially Explosive Atmospheres Warranty What this Warranty Covers and for HOW LongPatents TrademarksModem Setup RequirementsPhonecell SX6P GSM Phonecell SX6P GSM Phonecell SX6P GSM Enable Hardware Flow Control Phonecell SX6P GSM User anual Phonecell SX6P GSM Technical Manual Telular Corporation, all rights reserved