Skype Digital Enhanced Cordless Communication manual Resetting the system, Intercom and transfer

Page 16

2.Select < User Status > under Skype mode;

3.Press Left key, then the display shows the selection status;

4.Press Scrolling button to select the status you wish to set;

5.Press Left key to save.

To Set Skype Microphone and Speakerphone

1.Right click on the Skype DECT icon located at the bottom-right hand side;

2.Select Volume Control;

3.Set the Speaker or MIC as required. Illustration below.

To Make a Skype Conference Call:

1.When you already engaged on an ongoing call, if another Skype call is received, press Right key to enter option menu;

2.Then press Scrolling button to select Hook up and press Left key;

3.Press Right key to enter option menu again;

4.Press Scrolling button to select Conference Call;

5.Press Left key to connect the three parties together.

Note: You cannot host a conference call by yourself but can be invited to participate in a conference call opened by the other Skype users.

Resetting the system

If you have set a PIN and forgotten it, you need to reset the system. The Base PIN will be reset to 0000. If you reset the system, you will lose all stored information (including numbers in memory) and all features will return to their default settings. You need to register the handset to the base unit again.

While you are resetting the system, you should disconnect the telephone line cord from the back of the base unit, so you won't be interrupted by incoming calls. To reset the system without the PIN:

1.Disconnect the power lead from the back of the base unit

2.Press and hold the HANDSET LOCATOR button in the base unit, at the same time connect the power lead into the back of base unit. Release the LOCATOR button after you hear “beep” sound for five times. The IN USE light on base unit lights during this whole process.

3.After 2~3 seconds, you can hear “beep” sound for two times again and the IN USE light goes off;

4.Disconnect the power lead from base. Reconnect and you will hear a confirmation tone from the base unit.

Intercom and transfer

To Make an Intercom Call

1.Press the INT key. You hear Dial tone

2.Key in the number of the other handset

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Skype Dect Telephone Contents IntroductionPackage Content Physical DetailsMinimum System Requirements USB dongleHandset and Base Unit What the symbols mean Setting up your telephoneInstallation Choose a suitable site for the base unitImportant safety information Making and Answering Calls Call Waiting Skype / PstnConference Calling Phone BookSettings Call ListsTo Set External/Internal Ringer Volume To Set External/Internal Ringer Melody 1 9 melodyTo Set Key Tone On/Off Auto Talk FunctionTo Enter Base Settings Mode To Set Base VolumeTo Set Dial Mode To Set Base Melody 1-9 melodyDefault Settings To Enter Registration ModeLeast cost route LCR function Optional To Set LCRExtra Setting Skype FunctionTo Call a Skype User To Make Skype Out Call from PhonebookTo Make Skype Call from Contact List To Make Speed-Dial CallResetting the system Intercom and transferTo Set Skype Microphone and Speakerphone To Make a Skype Conference CallTroubleshooting When I press keys on the handset, nothing happensTo End an Intercom Call Always check first thatTechnical details Declaration of conformity
Top Page Image Contents