ViewSonic VS12109, PJ1173 warranty KEY Lock, Remote Receiv, Remote Freq, Information, Factory Reset

OPTION Menu

OPTION Menu (continued)

Item	Description
	KEY LOCK
	Using the ▲/▼ buttons turns on/off the key lock feature. When
	TURN ON is selected, the buttons on the projector except the
	STANDBY/ON button are locked.
	TURN ON ó TURN OFF
	• Please use to avoid a mischief and touching accidentally. This
	function does not have any effect on the remote control.

REMOTE RECEIV.

(1)Select a remote sensor using the ▲/▼ button. 1:FRONT ó 2:TOP ó 3:REAR

(2)Switch it using the ENTER or INPUT button.

¨(off) ó þ (on)

•A sensor cannot be turned off when the other two are off. Always at least one sensor is on.

	REMOTE FREQ.
	Use the ▲/▼ button to change the Projector's remote sensor
	setting.
	1:NORMAL ó 2:HIGH
	Items with a checkmark are on. The factory
	default setting is for both 1:NORMAL and 2:
SERVICE	HIGH to be on. If the remote control does not
	function correctly set the this to either only 1 or
(continued)	only 2 as described in Remote Control Settings.
	Neither can be turned off at the same time.
	INFORMATION
	Selecting this item displays a dialog titled “INPUT-INFORMATION”.
	It shows the information about the current input.

•The “FRAME LOCK” message on the dialog means the frame lock function is working.

•The “SCART RGB” message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the COMPONENT item in INPUT menu.

•This item can't be selected for no signal and sync out.

•When the MY TEXT DISPLAY is set to TURN ON, the MY TEXT is displayed together with the input information in the INPUT- INFORMATION box.

FACTORY RESET

Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, SECURITY and NETWORK are not reset.

RESET ï CANCEL

(continued on next page)

ViewSonic 47 PJ1173