ViewSonic VS12109 Using the MyScreen Password Function, Turning on the MyScreen Password Function

OPTION Menu

OPTION Menu (continued)

Item	Description
	1.3 If you have forgotten your PASSWORD
	1.3-1 Follow the procedure in 1.1-1 to display the
	ENTER PASSWORD BOX.
	1.3-2 While the ENTER PASSWORD BOX is
	displayed, press and hold the RESET button
	on the remote control for about 3 seconds or
	press and hold the INPUT and ► buttons on	Inquiring Code
	the projector for about 3 seconds.
		(PASSWORD)
	The 10 digit Inquiring Code will be displayed.
	• If there is no key input for about 55 seconds while
	the Inquiring Code is displayed the menu will close.
	If necessary repeat the process from 1.3-1.
	1.3-3 Contact ViewSonic with the 10 digit Inquiring Code. Your PASSWORD
	will be sent after your user registration information is confirmed.

	2. Using the MyScreen PASSWORD Function
	The MyScreen PASSWORD function can be used to prohibit access to the
	MyScreen function and prevent the currently registered MyScreen image
SECURITY	from being overwritten.
	2.1 Turning on the MyScreen PASSWORD
(continued)	Function
	2.1-1 Use the ▲/▼ buttons on the SECURITY
	menu to select MyScreen PASSWORD and	MyScreen
	press the ► button to display the MyScreen	PASSWORD on/off
	PASSWORD on/off menu.	menu
	2.2 Setting the PASSWORD
	2.2-1 Display the MyScreen on/off menu using the
	procedure in 2.1-1.

2.2-2 Use the ▲/▼ buttons on the MyScreen PASSWORD on/off menu to select TURN ON. The ENTER PASSWORD BOX (small) will be

displayed.ENTER PASSWORD BOX (small)

2.2-3 Use the ▲/▼/◄/► buttons to enter the PASSWORD. Move the cursor to the right side of the ENTER PASSWORD BOX (small) and press the ► button to display the PASSWORD AGAIN BOX, enter the same PASSWORD

again.PASSWORD AGAIN BOX

(continued on next page)

ViewSonic 49 PJ1173