ViewSonic PJ1173, VS12109 warranty Option Menu, Auto OFF, Lamp Time

OPTION Menu

OPTION Menu (continued)

Item	Description
	Using the ▲/▼ buttons adjusts the time to count down to
	automatically turn the projector off.
	Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
AUTO OFF	When the time is set to 0, the projector is not turned off automatically.
	When the time is set to 1 to 99, and when the passed time with no-
	signal or an unsuitable signal reaches at the set time, the projector
	lamp will be turned off.
	If one of the projector's buttons or the remote control buttons
	is pressed or one of the commands (except get commands) is
	transmitted to the control port during the corresponding time,
	projector will not be turned off.
	Please refer to the section “Turning off the power”.
	The lamp time is the usage time of the lamp, counted after the last
	resetting. It is shown in the OPTION menu.
	Pressing the RESET button on the remote control or the ► button
	of the projector displays a dialog.
LAMP TIME	To reset the lamp time, select the RESET using the ▲ button.
	RESET ï CANCEL
	• Please reset the lamp time only when you have replaced the lamp,
	for a suitable indication about the lamp.
	• For the lamp replacement, see the section "Lamp".
	The filter time is the usage time of the air filter, counted after the last
	resetting. It is shown in the OPTION menu.
	Pressing the RESET button on the remote control or the ► button
	of the projector displays a dialog.
FILTER TIME	To reset the filter time, select the RESET using the ▲ button.
	RESET ï CANCEL
	• Please reset the filter time only when you have cleaned or replaced
	the air filter, for a suitable indication about the air filter.
	• For the air filter cleaning, see the section "Air filter".

(continued on next page)

ViewSonic 44 PJ1173