ViewSonic VS12109, PJ1173 warranty Projector Control

Management with Web browser software

Configuring and controlling the projector via a web browser (continued)

Projector Control

The items shown in the table below can be performed using the Projector Control menu. Select an item using the up and down arrow keys on the PC.

Most of the items have a submenu. Refer to the table below for details.

NOTE • The setting value may not match with the actual value if the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button.

Controls the projector.

	Item	Description
Main
	Power	Turns the power on/off.
	Input Source	Selects the input source.
	Picture Mode	Selects the picture mode setting.
	Blank On/Off	Turns Blank on/off.
	Mute	Turns Mute on/off.
	Freeze	Turns Freeze on/off.
		Controls the magnify setting.
		In some input signal sources, it might stop “Magnify” even
	Magnify	though it does not reach to maximum setting value.
		The variable range:
		• For a RGB or HDMI signal 0-48
		• For a video, component or s-video signal 0-16
Picture
	Brightness	Adjusts the brightness setting.
	Contrast	Adjusts the contrast setting.
	Gamma	Selects the gamma setting.
	Color Temp	Selects the color temperature setting.
	Color	Adjusts the color setting.
	Tint	Adjusts the tint setting.
	Sharpness	Adjusts the sharpness setting.
	Active Iris	Selects the active iris setting.
	MyMemory Save	Saves the MyMemory data.
	MyMemory Recall	Recalls the MyMemory data.

ViewSonic 85 PJ1173