ACCESORIOS DEL TUBO
PERFORMANCE FEATURES
1.Para retirar los tubos de la PowerMate,
colóquelos en la posición vertical de bloqueo.
2.Pise el pedal de liberación rápida del tubo y tire del tubo hacia arriba para desprenderlo de la PowerMate.
Pedal de 
liberación 
rápida 
del tubo 
3.Coloque el accesorio deseado sobre el tubo. Consulte la CUADRO DE USO DE LOS ACCESORIOS (pág 16).
Tubo
telescopico
Cepillo para combinación
Tubo
telescopico
Cepillo para pelo de animales
Herramienta
para hendiduras
Tubo telescopico
Tubo telescopico
Cepillo para pisos
Pet PowerMate
Wand
NOTA:
Para remover el cepillo de combinación, presione el botón de liberador del cepillo y sepárelo.
Botón de liberación
del cepillo
NOTA:
Para remover el cepillo de piso y/o el cepillo para pelo de mascotas, presione el botón liberador del accesorio y sepárelo.
Botón de liberación del accesorio
Botón de liberación del accesorio
WARNING
Personal Injury Hazard
Always turn off and unplug the vacuum cleaner before cleaning the agitator area as agitator may suddenly restart. Failure to do so can result in personal injury.
BELT RESET
The PowerMate has
BELT RESET
Button
Belt
Reset Light
To correct problem: Turn off and unplug vacuum cleaner, remove obstruction, then press BELT RESET button.
If the problem persists, have the vacuum cleaner serviced by a Sears or other qualified service agent.
THERMAL PROTECTOR
This vacuum cleaner has a thermal protector which automatically trips to protect the vacuum cleaner from overheating. If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically. This allows the motor to cool in order to prevent possible damage to the vacuum cleaner.
To correct problem: Turn off and unplug vacuum cleaner to allow the vacuum cleaner to cool and the thermal protector to reset. Check for and remove clogs, if necessary. See REMOVING CLOGS (page 20). Also check and replace any clogged filters. Wait approximately thirty (30) minutes and plug the vacuum cleaner in and turn back on to check if the thermal protector has reset.
CHECK BAG INDICATOR
When the vacuum cleaner is running with normal airflow, the CHECK BAG light is off. The light comes on whenever the dust bag is full, airflow becomes blocked, or if there is a clog. If that occurs, first check the
disposable dust
bag. Then check
the motor safety |
|
filter and other | ENGLISH |
CLOGS (page 20). | |
possible clog |
|
locations shown in |
|
REMOVING |
|
To correct problem: See the TROUBLE- SHOOTING table (page
NOTE: The CHECK BAG indicator light may come on when using certain attachments, due to reduced airflow through attachment. The CHECK BAG indicator light may not turn on when the vacuum cleaner is used in low suction power level due to reduced air power.
POWERMATE STORAGE
The wand has a “U” shaped storage hook that slides into the “U” shaped slot on the canister.
The storage hook allows the wands and PowerMate to be stored with the canister to conserve storage space. The canister must be stored on end for this feature to be used.
To attach the |
|
PowerMate, it | Storage |
must be in the | Hook |
flat position. Use |
|
the handle |
|
release pedal to |
|
place it in this |
|
position. |
|
The wand will | Slot |
| |
slip out of the |
|
slot as it is lifted |
|
up for use and |
|
will slide into the |
|
slot as it is |
|
lowered for |
|
storage. |
|
14 | 19 |
|
