Skype Digital Enhanced Cordless Communication manual Installation

Page 6

Installation

1. Choose a suitable site for the base unit

Make sure it is not near to another telephone, nor to other electrical equipment.

2.Plug the mains power lead and the telephone line cord into the bottom of the base unit.

3.Plug the mains adapter into a

230V AC, 50 Hz mains socket with the switch on the socket set to OFF.

Note: The illustration of adaptor may vary from country to country.

4.Switch on mains power at the socket

5.Fit the batteries in the handset(s)

Insert the batteries cell following the batteries polarity indication.

Push the latch inwards, and then slide the cover until it clicks firmly into position.

6.Connect the base unit to the telephone line

7.Plug in the USB dongle into PC USB port

8. Download the latest version of Skype™ from www.skype.com.

This is a Windows-based installation. If you have already installed the Skype™ software, proceed to the next step.

5

Image 6
Contents Skype Dect Telephone Contents IntroductionMinimum System Requirements Package ContentPhysical Details USB dongleHandset and Base Unit What the symbols mean Setting up your telephoneInstallation Choose a suitable site for the base unitImportant safety information Making and Answering Calls Call Waiting Skype / PstnConference Calling Phone BookSettings Call ListsTo Set Key Tone On/Off To Set External/Internal Ringer VolumeTo Set External/Internal Ringer Melody 1 9 melody Auto Talk FunctionTo Set Dial Mode To Enter Base Settings ModeTo Set Base Volume To Set Base Melody 1-9 melodyLeast cost route LCR function Optional Default SettingsTo Enter Registration Mode To Set LCRExtra Setting Skype FunctionTo Make Skype Call from Contact List To Call a Skype UserTo Make Skype Out Call from Phonebook To Make Speed-Dial CallTo Set Skype Microphone and Speakerphone Resetting the systemIntercom and transfer To Make a Skype Conference CallTo End an Intercom Call TroubleshootingWhen I press keys on the handset, nothing happens Always check first thatTechnical details Declaration of conformity