Shiro SC3112 user manual Installing or Replacing the Battery, Switch Operation, Software Setting

SC3112 User Guide

1. INSTALLING OR REPLACING THE BATTERY

Install 2 Alkaline AAA batteries into the battery compartment and re-fit the cover before use.

IMPORTANT—before removing the battery compartment cover, ensure the base unit is disconnected from the telephone line.

Connection and conditions for use

You can connect your SC3112, to public networks in the United Kingdom or to an approved PBX using DTMF signaling. Each item of telephone equipment (phones, fax machines, etc.) has a ringer equivalence numbers (REN). The RENs of all equipment connected to an exchange line must not add up to more than 4 otherwise, one or more phones may not ring and/or answer calls correctly.

SC3112 has a REN of 1, and most other telephones have a REN of 1 unless marked otherwise.

2. SWITCH OPERATION

RINGER HI/LO Switch

Select your preferred ringer volume either HI or LO. The selection is at the back of the telephone.

HANDSFREE Volume Slider

Select your preferred Handsfree volume through the adjustment slider located at the side of the telephone.

3. SOFTWARE SETTING

In on-hook position, press SET key to begin settings. You would see the LCD panel display SE12345678 flashing. Press UP/DOWN or number key to change the settings. To set each item, press SET key. To exit menu, press SET key.

SET ITEM

DATE/TIME

OPERATIONS

Press SET key. Press 1 to display 1-dATE2-CL.

Press 1 to set the date. The year, month and date will be flashing on

4