SETTING UP YOUR UNIT
FACTORY PRESETS
The following table shows you the factory settings for your unit:
Display | Setting |
Language | English |
LCD Contrast | 1 |
Area Code | no setting |
LDS Code | 1 |
After the adapter is connected, the display will show as indicated below for setting.
1.“SET LANGUAGE” appears on the display. Press the REVIEW UP (
) button to select the language, E - English, F - French, S - Spanish, and then press the DIAL button to confirm the selection.
AM 12:00 1/01
E
SET LANGUAGE
2.When “LCD CONTRAST” appears, press REVIEW UP (
) to set the contrast darker, and then you can press REVIEW DOWN (
) to set the contrast back to the preset. The preset value is “1” and “2” is darker. When you are finished with this setting, press DIAL. The display will indicate as shown below and is ready to let you set the area code.
AM 12:00 1/01 2
LCD CONTRAST
6