3.Follow the procedure "Setting Up Your Unit” to set up your unit.
4.Place the unit on a flat table or mount it onto a wall. If you desire to place it onto a wall, please use the wall mount bracket and short line cord supplied to accomplish the wall mounting.
WALL MOUNT INSTRUCTIONS
1.Remove wall mount bracket and route cords as shown in diagram below.
2.Connect the adapter and the line cord. See Steps 2 & 3 on preceding page for specific instructions.
3.Rotate the handset hook, plug the coiled cord into the handset, and then plug the other end of the cord into the base.
4.Place the handset on the base.
1
23
Handset
Hook
NEW C
DEL
VOLUM
GH
PO
RS
TON*
HO
4
5