Device Quickstart Guide
5. Interface Configuration
Your browser should now show a tabbed
If you do not see all these tabs you are not in the “advanced admin” mode. To get there click on “Admin Logon” then “Advanced” at the top right of the web page.
These tabbed pages allow complete and detailed customisation of almost every element of the device, but for simple use as a Phoneserve gateway only a very few changes are necessary;
(The Info page displays current set up. There are no configuration changes possible on this page.)
On the System page; network connectivity options may be set, but because you are viewing that page you have obviously already managed those parameters via the IVR Interface.
On the SIP, Provisioning, Regional, User 1 and PSTN User pages; the device defaults should suffice for basic operations.
The Line 1 settings that may require changing from default are these:
Line Enable: Yes
Nat Settings:
NAT Keep Alive Enable: Yes
Sip Settings:
Sip Port: 5060
Proxy and Registration:
Proxy: adp1.winnerip.com
Register: Yes
Use OB proxy in Dialog: No
Subscriber Information:
Display name: Your name
User ID: Phoneserve Account Number (18 digits)
Password: left in blank
Audio Configuration:
Preferred Codec: G723
Use Pref Codec Only: No
© Phoneserve. All Rights Reserved Worldwide. | info@phoneserve.com | 5 |
|
|