w-
Storing Memory (Spe~d) Dial
numbers;,
To program a speed dial location, do the following:
With the phone OFF, enter the telephone number you wish to store. (20 Digits Maximum).
Enter program mode by pressing PROG. The display will show the following:
Enter th~ memory location (01..20) you V:lish to store the number in. As soon as the second memory location digit is entered, the unit
+ ~ill emit a happy tone (a short series of beeps) to confirm successful programming and exit program mo,de.
If programming is unsuccessful the unit will display:
Unsuccessful programming can result from not correctly completing the programming sequence. For example, if after entering a number on the LCO and entering program mode, the OFF key were pressed instead of entering
a valid memory location, the
"PROGRAMMING INCOMPLETE"
message would appear. If this message appears, simply repeat the programming sequence.
+
24
DT '21 | 24 | 5/15/98, 11:13AM |
~