Reviewing Numbers
Calls stored in memory can be
reviewed by pressing CID .The display will show the number of the most recent (CALL #01 ). The top line of the display is used to indicate the memory location number and the bottom line of the display shows the
name, see below: | .: |
To find out the corresponding phone number as well as the date and time of the call, press and hold the 7 (1) key. The date and time will be shown. Releasing the key will again show the caller's name.
There may be additional characters in the name which can not be shown on the current display. Press the ~ ( 9 ) key. This will overwrite the CIO memory location on the top line to show up to a maximum of 15 alpha characters for the duration of the
+key press. The first 12 alpha characters will be on the top line with up to 3
additional characters on the second line.
LT[I
Pressing the ( 0 (*) key) displays the |
| ||||
next lower in sequence call record. |
| ||||
Likewise, | pressing | the | ( Q (#) key) |
| |
displays the next higher in sequence) |
| ||||
call record. The higher the call number, |
| ||||
the | older | the call. |
|
|
|
To save you time in reviewing call |
| ||||
records, you can |
| ||||
call history log. For example, if you | + | ||||
press the 0 (*) key enough to scroll | |||||
back | to | the first | record, | pressing it | |
again will force the display to go to the very end of the call record.
29
DT 921 | 29 | 5/15/98,11:13AM |
~