However, when you dial directly from CID memory, only the last 7 digits of the received telephone number will be
used. Consequently, you would actually dial this:
~:'e AUDIOVOX DT921 was designed to accommodate this situation. If you need to temporarily add a long distance prefix and lor area code (such as 1503)
before the CID num~er, do the follow-
ing:.
.Beginning from the standby mode, key in the necessary digits. your displ~y will look like this:
~-
.I"\
~
Then, to temporarily add the last 7 digits only from a CJD memory, press CID .
.Using the 6 (;) and Q (#) keys. scroll through the received calls to locate the number you wish to dial.
of the caller is unavailable, or if the caller is outside the CID service area, the message UNAVAI~BLE is dis- played on the LCD.
~f'
If the caller has exercised the option to block his or her number from being sent, then the display will show
PRIVATE.
If an error is detected, then the CID information is incomplete and will not be displayed. "TRANSMISSION ERROR" will be displayed on the LCD screen.
~
~.
.Once you have located the number you wish to dial, simply press TALK key. The last seven digits will be added to the numbers already in the LCD, and the whole number shown below will be automatically dialed.
The occasional appearance of "TRANSMISSION ERROR" on your display does not indicate a problem with your unit or your telephone line. However. if this appears frequently, you may want to notify your telephone company.
28
d192I.p6S | 28 | 1998/6122.PM 07:27 |
~
rF
~