Setting Up Your AUDIOVOX DT921 c Choose an area near an electrical outlet and a telephone wall jack.
AC Power Adaptor
Plug the AC power adaptor into an electrical outlet and the DC connector to the back of the base unit.
Charge the handset battery pack before use. The battery pack recharges automatically whenever the handset is in the base unit. The batteries must be charged for 16 hours before using your phone for the first time.
+
Ha~dset Ringer
The handset ringer is programmed ON as the factory default setting. Refer to
PROGRAMMING THE RINGER on page 21 for more information.
Setting the Tone/pulse Switch
The TONE/PULSE switch is located on the bottom of the base unit and is factory set to TONE. If you have touch tone service, do not change the switch
setting. If you have rotary (Pulse) service, set the switch to PULSE.
12
DT '21 | 12 | 5/15/98. 11:13AM |
~