Sony GDM-5510 Specifications, Self-diagnosis function, If the ! power indicator is green

Self-diagnosis function

Specifications

This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the ! (power) indicator will either light up green or flash amber. If the ! (power) indicator is lit in amber, the computer is in power saving mode. Try pressing any key on the keyboard or moving the mouse.

CRT	0.24 mm aperture grille pitch
	21 inches measured diagonally
	90-degree deflection
	FD Trinitron
Viewable image size	Approx. 403.8 ⋅ 302.2 mm (w/h)
	(16 ⋅ 12 inches)
	19.8" viewing image

		Resolution
INPUT	MENU	Maximum	Horizontal: 2048 dots
1 2	OK		Vertical: 1536 lines
		Recommended	Horizontal: 1600 dots
! (power) indicator			Vertical: 1200 lines
		Input signal levels	Video signal
			Analog RGB: 0.700 Vp-p
x If the ! (power) indicator is green			(positive), 75 Ω
			SYNC signal
1 Disconnect any plugs from the video input 1 and 2			H/V separate or composite sync:
connectors, or turn off the connected computer(s).			TTL 2.2 kΩ, Polarity free
			Sync on Green: 0.3 Vp-p
2 Press the ! (power) button twice to turn the monitor			(negative)
off and then on.		Standard image area	Approx. 388 ⋅ 291 mm (w/h)
			(15 3/8 ⋅ 11 1/2 inches)
3 Hold the control button upward for 2 seconds			or
before the monitor enters power saving mode.			Approx. 364 ⋅ 291 mm (w/h)	EN
			(14 3/8 ⋅ 11 1/2 inches)
		Deflection frequency*	Horizontal: 30 to 130 kHz
OK			Vertical: 48 to 170 Hz
		AC input voltage/current	100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
		Power consumption	Approx. 135 W
If all four color bars appear (white, red, green, blue), the monitor		Operating temperature	10 °C to 40 °C
		Dimensions	Approx. 501 ⋅ 508 ⋅ 505 mm (w/h/
is working properly. Reconnect the video input cables and check
			d) (19 3/4 ⋅ 20 ⋅ 20 inches)
the condition of your computer(s).		Mass	Approx. 31.5 kg (69 lb 7 oz)
If the color bars do not appear, there is a potential monitor failure.		Plug and Play	DDC2B/DDC2Bi, GTF**
Inform your service representative of the monitor’s condition.		* Recommended horizontal and vertical timing condition
x If the ! (power) indicator is flashing amber		• Horizontal sync width duty should be more than 4.8% of
		total horizontal time or 0.8 µs, whichever is larger.
Press the ! (power) button twice to turn the monitor off		• Horizontal blanking width should be more than 2.3 µsec.
		• Vertical blanking width should be more than 450 µsec.
and then on.		** If the input signal is Generalized Timing Formula (GTF)
If the ! (power) indicator lights up green, the monitor is working		compliant, the GTF feature of the monitor will automatically
properly.		provide an optimal image for the screen.
If the ! (power) indicator is still flashing, there is a potential		Design and specifications are subject to change without notice.
monitor failure. Count the number of seconds between amber
flashes of the ! (power) indicator and inform your service
representative of the monitor’s condition. Be sure to note the
model name and serial number of your monitor. Also note the
make and model of your computer and graphic board.

19