Adjusting the shape of the picture (GEOMETRY)
The GEOMETRY settings allow you to adjust the rotation and shape of the picture.
The 
(rotation) setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal.
1Press the MENU button.
The menu appears on the screen.
2Move the control button up or down to highlight 
GEOMETRY and press the control button.
The GEOMETRY menu appears on the screen.
3Move the control button up or down to select the desired adjustment item. Then press the control button.
The adjustment bar appears on the screen.
4Move the control button up or down to make the adjustment. Then press the control button.
Select To
rotate the picture
expand or contract the picture sides
shift the picture sides to the left or right
adjust the picture width at the top of the screen
shift the picture to the left or right at the top of the screen
0reset all the GEOMETRY adjustments to the
RESET | factory setting levels. Select OK. |
|
|
For more information about using the RESET mode, see “Resetting the adjustments (RESET)” on page 14.
Adjusting the convergence
(CONVERGENCE)
The CONVERGENCE settings allow you to adjust the quality of the picture by controlling the convergence. The convergence refers to the alignment of the red, green, and blue color signals. If you see red or blue shadows around letters or lines, adjust the convergence.
These settings are stored in memory for all input signals.
1Press the MENU button.
The menu appears on the screen.
2Move the control button up or down to highlight
CONVERGENCE and press the control button.
The CONVERGENCE menu appears on the screen.
3Move the control button up or down to select the desired adjustment item. Then press the control button.
The adjustment bar appears on the screen.
4Move the control button up or down to make the adjustment. Then press the control button.
Select | To |
|
| ||||
EN | |||||||
|
|
|
| horizontally shift red or blue shadows | |||
|
|
|
|
| |||
|
|
|
|
| |||
|
|
|
|
|
|
| |
|
|
|
| vertically shift red or blue shadows |
| ||
|
|
|
|
|
|
| |
|
|
| T | vertically shift red or blue shadows at the top of |
| ||
|
|
| the screen |
| |||
TOP |
| ||||||
|
|
|
|
|
|
| |
|
|
| B | vertically shift red or blue shadows at the bottom |
| ||
|
|
| of the screen |
| |||
BOTTOM |
| ||||||
0reset all the CONVERGENCE adjustments to
RESET | the factory setting levels. Select OK. |
|
|
For more information about using the RESET mode, see “Resetting the adjustments (RESET)” on page 14.
10
