xUsing the MENU and control buttons
1Display the menu.
Press the MENU button to display the menu on the screen.
MENU
2Select the menu you want to adjust.
Highlight the desired menu by moving the control button up or down. Then press the control button.
OK 
OK
3Adjust the menu.
Move the control button up or down to make the adjustment and press the control button.
If you want to select another menu;
Adjusting the brightness and contrast (CONTRAST/BRIGHT)
These settings are stored in memory for the signals from the currently selected input connector.
1Press the MENU button.
The menu appears on the screen.
2Move the control button up or down to highlight 
. Then press the control button.
The CONTRAST/BRIGHT menu appears on the screen.
3Move the control button up or down to highlight 6 or 
. Then press the control button.
4Move the control button up or down to adjust the contrast (6) or brightness (
). Then press the control button.
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR MODE ( 
) of the OPTION (
) menu, the following CONTRAST/BRIGHT menu appears on the screen.
move the control button up or down to select 
and press the control button to exit the menu.
OK 
OK
CONTRAST / BR I GHT
s RGB |
|
: | / |
| EX I T : MENU |
EN
4Close the menu.
Press the MENU button. If no buttons are pressed, the menu closes automatically after about 45 seconds.
You cannot adjust the contrast (6) or brightness (
) on this screen. If you want to adjust them, select a mode other than sRGB in the COLOR MODE ( 
) of the OPTION (
) menu.
For more information about using the sRGB mode, see
“Adjusting the color of the picture (COLOR)” on page 12.
MENU
8
