Southwestern Bell 26963 manual Changing the Battery

Page 34

CHANGING THE BATTERY

Make sure the telephone is OFF before you replace battery.

1. Remove the battery compartment door.

2. Disconnect the cord attached to the battery pack and remove the battery pack from the handset.

3.Insert the new battery pack and connect the cord into the jack inside the handset.

4.Put the battery compartment door back on.

5. Place handset in the base to charge. If you don’t charge the handset battery properly (for 12 hours) when you first set up the phone and/or when you install a new battery pack, the battery’s long-term performance will be compromised.

BATTERY SAFETY PRECAUTIONS

•Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury.

•To reduce the risk of fire or personal injury, use only the battery listed in the User’s Guide.

•Keep batteries out of the reach of children.

•Remove batteries if storing over 30 days.

RBRC

RBRC

Ni-Cd

NOTE: The RBRC seal on the battery used in your product indicates that we are participating in a program to collect and recycle Nickel Cadmium batteries throughout the United States. Please call 1-800-8-BATTERY for information or contact your local recycling center.

34

Image 34

Contents Southwestern Bell FCC Registration Information Table of Contents Optional Introduction Getting Started Before YOU BeginInstallation Desktop InstallationWall Mount Installation USE Charge Voice Mail Setup Setting the Area CodeTONE/PULSE Dialing Setting the Ringer Sound Cordless Phone Basics Making a CallReceiving a Call VolumeFlash Ringer Channel ButtonMute Temporary Tone Paging the Handset Voice MessagingMemory MEMKEY Characters RE/PA Caller ID Operation Receiving and Storing CallsDeleting Records DELETE?Dialing a Caller ID Number Changing the Number FormatCaller ID Display ReviewCall Waiting ID Options Drop & Answer Hold Options Conference Options Connecting the Belt Clip Connecting a Headset to HandsetHeadset and Belt Clip Operation Optional Troubleshooting Guide Is the battery pack installed correctly? Recharge Phone displays Place handset in base for 10 seconds to reset Service Changing the Battery Index Page $5.00 Model 26963 15493150 Rev E/S Southwestern Bell Información DEL Registro a LA FCC Tabla DE Contenido FCCSolución DE Problemas Introducción Para Comenzar Antes DE ComenzarInstalación Instalación Sobre Escritorio O Superficie PlanaInstalación Sobre Pared Sujeta firmemente en su sitio. Placa de pared no incluida Programación Programación DE LA Clave DE AreaMarcado POR Tono O DE Disco Para Programar EL Sonido DEL Timbre Operación Básica DEL Teléfono Inalámbrico Para Hacer UNA LlamadaPara Recibir UNA Llamada VolumenBotón DE Flash Timbre Botón DE CanalesEnmudecedor Tono Provisional Temporario Para Localizar EL Auricular Mensaje DE VOZMemoria Tecla Caracteres Para Cambiar UN Número Almacenado Operación DEL Identificador DE Llamadas Caller ID Para Recibir Y Almacenar LlamadasPara Borrar Archivos Botones para revisar CID ReviewPara Marcar UN Número DEL Caller ID Para Cambiar EL Formato DEL NúmeroPantalla DEL Identificador DE Llamadas Caller ID Transferencia a Correo DE VOZ To Call Notes Colgar Y Contestar Drop Answer ALL Opciones Para EsperaOpciones Para Conferencia Para Conectar Audífonos AL Auricular Para Conectar EL Gancho Para CinturónSolución DE Problemas Desconecte la base del contacto de pared y conecte otroLínea. Intente desconectar algunos teléfonos Recharge Servicio Para Cambiar LA Batería Índice Page Pedidoshacer Accesoriosde Modelo 26963 15493150 Rev E/S Impreso en Tailandia