Southwestern Bell 26963 manual USE Charge Voice Mail

5. Remove the mounting bracket.

Rotate it so that the bottom of	7
the phone is flat. Reattach the
mounting bracket by inserting	6
the tabs into the slots on the top
of the unit first, and then
snapping the bottom tabs into
place.
6. Plug the short telephone line	5
cord into the jack marked TEL
LINE on the back of the unit and
plug the other end into a
modular wall jack.

7.Slip the mounting holes over the wall plate posts and slide

the unit down firmly into place.	9
(Wall plate not included.)
8. Remove the handset hook; turn	8
it upside down, and put it back
in the slot. You need to do this
so the handset doesn’t fall out
of the base.

9. Raise the base antenna.

NOTE : The phone automatically defaults to touch-tone dialing. To change to pulse (rotary) dialing, see “Tone/Pulse Dialing”. If you don’t know which type of service you have, check with the phone company.

IN USE

CHARGE

VOICE MAIL

PAGE

9