Motorola XV2600, XU1100 manual Cloning, Resetting Factory Defaults

Page 35

Target Radio Display

k 188

218

Source Radio Display

Cloning

The X Series radios have cloning capability when connected via the 53879 Multi-Unit Charger (MUC). Cloning enables rapid fleet reconfiguration because all selectable settings are sent to the target unit. The Target radio must be placed behind the Source radio and turned On. Radios must be of the same band; UHF or VHF. Multi-channel models can Clone to single-channel radios, but only the first channel is cloned. Please refer to the MUC User's Guide included with this accessory.

• Make sure k is accessed. Please refer to page 11.

• The source radio enters Cloning Mode and clones through an extended press of J.

•Either W for pass or N for fail appears on the Source

Radio Display.

•If cloning was successful all segments on the Target

Radio Display will light up. Turn radio Off and back On again to use.

• Pressing J again will clone additional radios.

Note: The MUC does not need to be plugged in for Cloning feature to work.

Resetting Factory Defaults

All selectable features can be reset to factory defaults by turning the radio On while holding M and \ buttons simultaneously for three seconds.

Note: The radio cannot be reset if Manager Lock is enabled.

k

Programming Mode

23

Image 35

Contents @6864110R04@ Page Introduction Package ContentsContents FCC Licensing Information FCC Licensing InformationFCC Licensing Information Exposure to Radio Frequency Energy Safety and General InformationRF Operational Characteristics Two-Way Radio Operation Safety and General InformationPortable Radio Operation and EME Exposure Antenna CareAircraft IiiBody-Worn Operation Data OperationOther Medical Devices Medical DevicesPacemakers Hearing AidsPotentially Explosive Atmospheres Safety and General Use While DrivingOperational Warnings For Vehicles with an Air BagAntennas Charging Safety InstructionsBlasting Caps and Areas Operational CautionsVii Viii Canada TTY Text TelephoneGetting Started Getting StartedWatts Location BandUse J to Diagram of Your New XSeries Radio and its FunctionsIndicator Light Use B to Transmit Call Tone Use M to Use T / S toGetting Started Charging with the 10-Hour Charger Charging with the 53872 Drop-in Charging Tray Battery Meter Installing AA Alkaline BatteriesSwivel Belt Holster Battery LifeTurning On/Off Your Radio Turn Knob Display Normal Menu ModeVolume Operating Radio Operating RadioMonitor FeaturesFeatures Signal Strength Indicator/Channel BusyHands-Free Use/VOX With Compatible VOX AccessoriesMicrophone Gain Setting Sensitivity Level Without AccessoriesEditing Scan List ScanningEnd-of-Transmission Tone Setting the Battery TypeScan Advancement/ Nuisance Delete Lock KeypadKeypad Tones Settings and Functions DisplayWhile you are turning on your radio Programming ModeProgramming Mode Keys Pressed. FunctionThen Press Programming Mode Press DisplayInterference Eliminator Code ChannelFrequency Scramble Code 2-watt models only Bandwidth when FCC allowableManager Lock Assigning Channels to Presets XU2600 and XV2600 OnlyCloning Resetting Factory DefaultsIf the radio is submerged in water Use and CareUse and Care Frequency and Code Charts Frequency and Code ChartsUHF Frequencies Code Interference Eliminator CodesCode Code Word Digital Interference Eliminator CodesTroubleshooting TroubleshootingSymptom Try This Limited talk range Troubleshooting SymptomLow batteries Heavy static orInterference Keypad lockedPlease refer to III. Who Is Covered Motorola Limited WarrantyMotorola Limited Warranty II. What the Period of Coverage IsMotorola WarrantyLimited VI. What this Warranty Does Not Cover VII. Some Other Limitations VIII. Patent and Software Provisions IX. State Law and Other Jurisdiction Rights Product Services All Products Two-WayPatent Notice Software Copyright NoticeExport Law Assurances FCC FAX Forms Motorola Services FCC Page XTN Series Quick Reference Call Tone Mic Gain Sensitivity Level Scan List XTN Series FeaturesPage @XTNXTN@