Wall Mounting

The Wall Mounting bracket is designed to fit on standard Wall Mounting plates.

1.Choose a spot near an electrical outlet (120v AC) and a telephone jack. Your phone requires a modular telephone jack. The power cord is six feet long; make sure there is an electrical outlet within reach of the base. A wall switch should not control the outlet. If the switch is ever turned off, your phone may not function (unless you have a fully charged battery in the spare battery charger).

2.Position the wall-mounting bracket on the base. Line up the tabs on the wall-mounting bracket with the holes on the bottom of the base. Snap the wall-mounting bracket firmly in place.

3.Mount the base on the wall. Position the base so the mounting studs will fit into the holes on the wall-mounting bracket. Slide the base down on the mounting studs until it locks into place

4.Connect the telephone line cord. The telephone line cord has a snap-in plug at each end. Insert one end into the jack on the back of the base, and insert the other end of the plug into the wall jack.

5.Plug the AC adapter into an electrical outlet and the DC connector into the power jack located on the back of the base unit.