QUICK REFERENCE GUIDE
•Enter the number you wish to store (up to a maximum of 20 digits).
•Press the MEMORY key to store the number and exit.
Dialing from Memory
From the base unit:
•Lift the handset.
•Press the MEMORY key and then enter the 2 digit memory location code (00 to 20) to be dialed.
•The number stored in the selected memory location will be automatically dialed.
Or
•Lift the handset and press the
QUICK MEM key to automatically dial the number stored in location ‘00’.
From the wireless headset:
•Put on the wireless headset.
•Flip the microphone down to the ON position. You should hear dial tone.
•Using the dial card (with keypad facing you), press the MEM key followed by the 2 digit memory location code (00 to 20) to be dialed.
•The number stored in the selected memory location will be automatically dialed.
Using Redial
From the base unit:
•Lift the handset and press the
REDIAL key. The last number dialed from the base unit will be automatically dialed.
From the wireless headset:
•Put on the wireless headset.
•Flip the microphone down to the ON position. You should hear dial tone.
•Using the dial card (with the keypad facing you) press the REDIAL key. The last number dialed from the dial card will be automatically dialed.
FLASH
From the wireless headset:
•During an active call, press the FLASH key on the dial card to flash the line. This feature is commonly used with services such as Call Waiting.
Or
•During an active call, press the FLASH key located on the right side of the wireless headset. The FLASH key has is surround by ( ) to help you locate it by touch.
22