ADDITIONAL OPERATION
Extension In Use Indication
When another telephone on the same line is currently in use, the IN USE LED on the base unit, and the IN USE/BAT LOW LED on the wireless headset will flash green.
Programming the Ringer Type
The ringer of the base unit and wireless headset can be independently programmed to one of four different tones or OFF.
All programming functions must be done using the base unit keypad.
Programming the Base Ringer:
•The phone must be OFF and the corded handset should be cradled.
•Press the PROGRAM key.
•Press the # key (to enter ringer program mode).
•Press the 1 key (to program the base ringer)
•Press the 1,2,3 or 4 key to review the four available ringers. After each press, the corresponding ringer will be played from the base unit.
•Once you have selected the ringer you prefer, press the PROGRAM key to confirm.
•You can also control the volume setting of the base ringer using the switch on the right side of the base. The switch has three positioins, OFF, Low or High. Choose the volume setting that you prefer.
Programming the Wireless Headset Ringer:
•The phone must be OFF and the corded handset should be cradled.
•Press the PROGRAM key.
•Press the # key (to enter ringer program mode).
•Press the 2 key (to program the headset ringer)
•Press the 1,2,3 or 4 key to review the four available ringers. Or press the 0 key to turn the headset ringer OFF. After each press, the corresponding ringer will be played from the headset.
•Once you have selected the ringer you prefer, press the PROGRAM key to confirm.
24