BASIC OPERATION
BASIC OPERATION
MAKING CALLS
Method | Live Dialing |
Press PHONE. Dial the phone number.
Press OFF to end your call.
Method |
|
There are 24 digit. Dial the phone number, up to 24 digits. Use the DELETE key to backspace if you make a dialing mistake. Then press PHONE.
o | Press OFF to end your call. |
When the Handset is in use, the IN USE/CHARGE light on the Base Unit will be ON. When the Handset is in the Base Unit cradle, the IN USE/CHARGE light glows steadily.
VOLUME CONTROL
While you are on a call, press 
to raise the inbound volume and 
to lower it. The Handset will display the relative volume setting as you adjust it.
CHANNEL CHANGING
If you experience noise or interference while on a call, you may be too far from the Base Unit, or in an obstructed area. Try moving to a different location. If this does not improve the transmission, press PROG/CHAN. You can press this key more than once, if necessary.
NOTE: This feature only operates while you are on an active call.
10