Answering System Operation
FEATURE SUMMARY Default settings indicated by * .
SYSTEM ANNOUNCES: | DESCRIPTION/DIRECTIONS: | |
|
|
|
“Set | Security Code” | Set the remote access code you will use to ac- |
50* |
| cess features and functions of the answering |
| system from a touch tone phone. The code can be | |
|
| changed to any |
|
|
|
“Set | Audible Message | When Message Alert is turned ON, the base beeps |
Alert” | once every 10 seconds when a new message | |
Off*/On | has been received. | |
|
| |
“Set Announce Only” | When you turn Announce Only ON, callers hear | |
Off*/On | your announcement, but cannot leave a message. | |
|
| |
“Set Base Ringer” | Turn the Base ringer on or off. | |
Off/On* |
| |
|
| |
“Set Number of Rings” | Choose how many times the phone will ring before the | |
2 |
| system answers a call. With Toll Saver active, the |
4* |
| system answers after two rings when you have new |
|
| messages and after four rings when you have no new |
6 | messages. | |
Toll Saver | ||
| ||
|
|
NOTE: You can press and hold CHANGE to advance the remote access code in increments of ten.
NOTE: Exit Feature Setup at any time by pressing a PLAY/STOP button.
Listen to, Save & Delete Messages
The system automatically saves your messages until you delete them and can store 15 minutes of messages, memos, and announcements (up to a maximum of 99 messages). A message or memo can be up to 4 minutes in length.
Before playing a message, the system announces the day and time it was received. While the message plays, the message window displays the number of the message. After play- ing the last message in a mailbox, the system announces “End of messages.” If the system has less than five minutes of recording time left, it announces the remaining time.
Answering System Operation
31