Setup
Connecting Power to Base Unit
1.Plug the AC power adapter into an electrical outlet, and the DC connector into the bottom of the Base Unit.
Installation and Charging of Battery Cells in Handset
1. Remove the Battery cover and place the new battery cells in the Handset with the positive and negative poles aligned in the battery compartment.
2. Replace the battery cover by sliding it upwards.
3. If the new battery cells are not already charged, place the Handset in its Charger or Base Unit, and allow it to charge for a minimum of 12 hours. After initial charge, a maintenance charge of 8 hours should be sufficient.
The original Handset that is shipped with your i 5866 system will be automatically registered to the Base. This Handset is HANDSET 1.
Getting Started
7