VTech VT 2428 manual Batteries, Replacing the Handset Battery Pack

Page 17

BATTERIES

Charge the Handset Battery Pack

•This battery should remain charged up to six days with the ringer turned on and up to 12 days with the ringer off. A fully charged battery provides an average talk time of about six hours.

•The battery pack needs charging when:

—A new battery is installed in the handset.

—The phone beeps twice every 5 seconds.

—The screen displays BATTERY LOW and the low battery icon.

•Place the handset in the base so the CHARGING light turns on. The battery pack is typically fully charged in eight hours.

•You can keep the battery fully charged by returning the handset to the base after each use.

•If you repeatedly get a low battery indicator, even after charging overnight, the battery should be replaced. Use VTECH Battery.

CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

Charge the battery provided with or identified for use with this product

only in accordance with the instructions and limitations specified in this User’s Manual.

Replacing the Handset Battery Pack

1Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward.

2Lift out the old battery pack and disconnect.

3Align the two holes in the new battery pack’s plug with the socket pins, and snap the plug into place. Place the battery pack in the compartment with the wires in the lower left corner, along the bottom of the battery pack.

4Replace the cover by sliding it up into place.

5The new battery pack must be charged before using the phone. Place the handset in the base and allow it to charge for at least 12 hours the first charge. The telephone might operate before that, but for best performance, let the battery pack charge fully.

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Contents Important Safety Instructions Parts Check List Before YOU BeginAbout Caller Identification Caller ID Before You Install InstallationCheck for dial tone Table/Desk InstallationTelephone Operation Telephone Operation Headset Jack Handset Ringer Style/Battery SaveTemporary Tone Dialing Operating Range Store a Number or Name in Memory Telephone MemoryDial a Memory Number Edit a Number/Name Stored in MemoryDelete a Number/Name Stored in Memory Store a Number/Name in the Directory Telephone Directory Dial a Number from the Directory Edit a Number/Name Stored in the Directory Delete a Number/Name Stored in the Directory About Call History Caller ID OperationReview Call History Delete a Specific CallStore a Call History Record in the Directory Dial a Displayed NumberBatteries Replacing the Handset Battery PackIf you hear noise or interference when using the phone If the phone does not ring when you receive a callCase of Difficulty If the phone doesn’t work at all, check these items firstIf you lose a call after changing channels If you hear other calls while using your phoneMaintenance What does this limited warranty cover? Warranty StatementHow Long is the limited warranty period ? What is not covered by this limited warranty ?Other Limitations FCC Part FCC and IC RegulationsIC Industry Canada Rbrc Seal Rbrc Seal Technical SpecificationsIssue
Top Page Image Contents