VTech VT 2428 manual Table/Desk Installation, Check for dial tone

Page 6

INSTALLATION

Table/Desk Installation

4.Charge the handset battery.

Place the handset in the base. Charge the battery for at least 12 hours the first time.

5.Check for dial tone.

After the batteries are charged, pick up the handset and press PHONE ; you should hear a dial tone.

6.Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged. If you have dial pulse (rotary) service, you’ll need to change the dial mode.

•Press PROG/CHAN on the handset to enter programming mode.

•Press or until the screen displays DIAL MODE: and the currently selected mode.

•Press SELECT.The current setting blinks.

•Press to select TONE or PULSE .

•Press SELECT, to save the displayed mode.

Wall Installation Using a standard modular Wall Plate

1Connect the T-shaped wall mount bracket to the slots on the underside of the Base Unit. as shown in the illustration.

2Connect the power cord to the Base Unit.

3Connect the telephone line cord to the Base Unit.

4Mount the Base Unit onto the wall plate.

5Follow the steps in Table/Desk installation.

4

Image 6

Contents Page Contents Important Safety Instructions Before YOU Begin About Caller Identification Caller IDParts Check List Installation Before You InstallTable/Desk Installation Check for dial toneTelephone Operation Telephone Operation Handset Ringer Style/Battery Save Temporary Tone DialingHeadset Jack Operating Range Telephone Memory Store a Number or Name in MemoryEdit a Number/Name Stored in Memory Delete a Number/Name Stored in MemoryDial a Memory Number Telephone Directory Store a Number/Name in the DirectoryEdit a Number/Name Stored in the Directory Delete a Number/Name Stored in the DirectoryDial a Number from the Directory Review Call History Caller ID OperationAbout Call History Delete a Specific CallDial a Displayed Number Store a Call History Record in the DirectoryReplacing the Handset Battery Pack BatteriesCase of Difficulty If the phone does not ring when you receive a callIf you hear noise or interference when using the phone If the phone doesn’t work at all, check these items firstIf you hear other calls while using your phone If you lose a call after changing channelsMaintenance How Long is the limited warranty period ? Warranty StatementWhat does this limited warranty cover? What is not covered by this limited warranty ?Other Limitations FCC and IC Regulations FCC PartIC Industry Canada Rbrc Seal Technical Specifications Rbrc SealIssue