VTech VT 2428 manual Rbrc Seal Technical Specifications

Page 25

The RBRC™ Seal

Technical

Specifications

 

 

 

 

The RBRC™ Seal

The RBRC® Seal on the

nickel-cadmium battery contained in our product indicates that VTech Communications, Inc. is voluntarily participating in

an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada.

The RBRC® program provides a

convenient alternative to placing used

nickel-cadmium batteries into the trash or

municipal waste, which may be illegal in

your area.

VTech’s participation in RBRC® makes it

easy for you to drop off the spent battery

at local retailers participating in the RBRC®

program or at authorized VTech product

service centers. Please call 1-800-8- BATTERYTM for information on Ni-Cd

battery recycling and disposal bans/

restrictions in your area. VTech’s

involvement in this program is part of its

commitment to protecting our environment

and conserving natural resources.

Remove the nickel-cadmium battery pack

by pressing on the Handset battery cover

and sliding downward.

RBRC® is a registered trademark of

Rechargeable Battery Recycling

Corporation.

FREQUENCY CONTROL

Crystal controlled PLL synthesizer

TRANSMIT FREQUENCY

Base: 2411.15 - 2418.4 MHz

Handset: 912.75 - 917.10 MHz

RECEIVE FREQUENCY

Base: 912.75 - 917.10 MHz

Handset: 2411.15 - 2418.4 MHz

CHANNELS

30 Channels

NOMINAL EFFECTIVE RANGE Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use.

SIZE

Handset : 35mm x 58mm x 165mm

Base : 166mm x 109mm x 50mm

WEIGHT

Handset : 170 grams

Base : 206 grams

POWER REQUIREMENTS

Handset : 600mAh NI-CD Battery

Pack

Base : 9V DC @ 400mA

MEMORY

Speed Dial: 10 Memory locations, into 16 digits per location.

CID : Alpha Numeric Display 99

Memory locations

SPECIFICATIONS ARE TYPICAL AND MAY CHANGE WITHOUT NOTICE.

23

Image 25
Contents Page Contents Important Safety Instructions About Caller Identification Caller ID Before YOU BeginParts Check List Before You Install InstallationCheck for dial tone Table/Desk InstallationTelephone Operation Telephone Operation Temporary Tone Dialing Handset Ringer Style/Battery SaveHeadset Jack Operating Range Store a Number or Name in Memory Telephone MemoryDelete a Number/Name Stored in Memory Edit a Number/Name Stored in MemoryDial a Memory Number Store a Number/Name in the Directory Telephone DirectoryDelete a Number/Name Stored in the Directory Edit a Number/Name Stored in the DirectoryDial a Number from the Directory About Call History Caller ID OperationReview Call History Delete a Specific CallStore a Call History Record in the Directory Dial a Displayed NumberBatteries Replacing the Handset Battery PackIf you hear noise or interference when using the phone If the phone does not ring when you receive a callCase of Difficulty If the phone doesn’t work at all, check these items firstIf you lose a call after changing channels If you hear other calls while using your phoneMaintenance What does this limited warranty cover? Warranty StatementHow Long is the limited warranty period ? What is not covered by this limited warranty ?Other Limitations FCC Part FCC and IC RegulationsIC Industry Canada Rbrc Seal Rbrc Seal Technical SpecificationsIssue