Speed dial
You can store frequently called numbers either as speed dial numbers or in the directory.. Each entry can contain up to 24 digits.. You can program names with the numbers, each containing up to 15 characters.. Up to 10 numbers and names can be stored alphabetically in the directory, and nine numbers with names into designated speed dial memory locations (1 through 9).. See Directory beginning on page 16 for instructions..
Store a number/name in speed dial
1.Press PROG on the handset..
2.Press once and the screen displays SPEED DIAL.
3.Press SELECT and the screen displays ENTER
4.Press the key (1 through 9) for the memory location to store this entry.. The screen displays ENTER NAME.
5.Using the chart on the next page, enter up to 15 characters for the name to be stored with the number.. Use to backspace and� make corrections; use to advance and add a space..
6.When finished� entering the name, press SELECT. The screen displays ENTER NUMBER.
7.Enter the telephone number using the number keys.. Use to backspace and make corrections.. After at least one digit has been entered, press REDIAL/PAUSE to store pauses in the dialing sequence, if necessary.. Press REDIAL/PAUSE to display the last number dialed..
8.Press SELECT to store your entry.. The screen displays DISTINCT RING? and the current setting..
9.Press or to change the setting.. Choose Y (for yes) if you wish the telephone to alert you to calls from this number by� changing to a d�istinctive ringing pattern after the first ring. Choose N (for no) for a normal ringing pattern..
10.Press SELECT to confirm y�our selection. If y�ou chose Y, a D (for distinct ring) will be displayed with the directory entry..
•The entries stored in speed dial memory will be marked with 01 through 09 in the telephone directory..
•Press OFF anytime to exit memory mode..
Basic operation
www.vtechphones.com | 13 |