VTech T2326 warranty Check for dial tone, Dial mode, Set the ringer

Page 7

Installation

•When the minute is blinking, press or until the screen displays the correct minute.. Press SELECT.

•When AM or PM is blinking, press or to select between AM or PM. When the desired setting is blinking, press SELECT.

Check for dial tone

After the batteries are charged, press TALK on the hand�set; y�ou should� hear a d�ial tone, otherwise, try plugging this telephone to another telephone jack..

Dial mode

If you have touch tone service, your phone is ready to use as soon as the battery is charged.. If you have pulse (rotary) service, it is necessary to change the dial mode..

•Press PROG.

•Press until the screen displays DIAL MODE: and the current setting..

•Press SELECT. The current setting blinks..

•Press or to toggle between TONE and PULSE until the desired dial mode is blinking..

•Press SELECT to save..

Set the ringer

•Press PROG.. Press twice, the name of the current ringer will display and the tone of the ringer will be heard..

•Press or to scroll through the four ringers.. Press SELECT when the desired ringer is displayed and heard..

•In the event of a power outage, or if your telephone’s power cord is unplugged, it is necessary to set the time again (see page 6)..

Getting started

www.vtechphones.com

Image 7

Contents Table of contents Need HELP? Before using this telephone, you must read Parts checklistBefore you begin Choose a location InstallationIf you subscribe to DSL service Table/desk installationWall mounting Language Charge the handset batterySet handset date and time Check for dial tone Dial modeSet the ringer Message waiting Handset operation Telephone operationLocate handset Base unit operationOperating range Temporary tone dialingScreen displays When Display screen messagesStore a number/name in speed dial Speed dialPress Once Twice Times 4 Times 5 Times 6 Times Reassign locations in speed dial Edit a number/name in speed dialDelete a number/name in speed dial Dial a speed dial numberStore a number/name in the directory DirectoryEdit a number/name in the directory DirectoryDelete a number/name in the directory Press OFF anytime to exit directory Dial from the directoryMove a number/name to memory BasicCaller ID Review call history About call history caller IDDelete records from call history Store a call history entry to the directory Dial a displayed numberScreen displays When Batteries Battery care and maintenanceReturn the handset to its base unit when not in use TroubleshootingUser’s manual My handset beeps 7 of this user’s manual to set the dial modeCannot dial out With the base unit and produce a dial toneDisplays on my Handset Minute for the handset and base unit to resetBase unit when not in use Battery on page 4 of this user’s manualKeys or buttons work Installed in a higher locationHear noise Make sure the power cord is plugged Outlet or near the microwave ovenWhen I receive a call Using my telephoneHear other calls while A higher area Microwave oven or in the same outletCaller ID isn’t Wait for a few minutes Disconnect the power to the base unitConnect power to the base unit Re-install the batteryWarranty MaintenanceHow do you get warranty service? Important safety instructions FCC Part FCC, Acta and IC regulationsIndustry Canada Rbrc seal Rbrc sealTechnical specifications Index Index 91-000859-010-000 User’s Manual

Related manuals

Manual 41 pages 11.9 Kb