Installation
Table/desk installation
1.Plug the connector of the AC power adapter to the jack marked AC 9V at the bottom of the base unit.. Plug the AC power adapter into a standard electrical outlet (110V AC) not controlled by a wall switch..
2.Connect the telephone line cord to the jack marked TEL LINE at the bottom of the base unit.. Plug the other end of the telephone line cord to a wall jack..
If you subscribe to DSL service
If there is interference during telephone conversations and/or your caller ID features are not functioning properly, install a noise filter to the telephone line between the base unit and the telephone wall jack.. Contact y�our DSL provid�er for a noise filter.
Wall mounting
1.Connect the AC power cord and the telephone line cord as described in the Table/Desk Installation section above..
�����������������
����
�������������������
������
Getting started
www.vtechphones.com