•Press REDIAL/ PAUSE to display the last number dialed from this phone to store it in speed dial memory.
•Each handset’s speed dial entries are independent from the other. For example,
a speed dial entry stored in HS1 cannot be accessed/dialed by HS2.
Telephone Directory
Your phone can store 10 (including the nine speed dial entries) numbers with names (up to 15 characters for the name and 24 digits for the number) in each handset.
When memory is full the screen displays MEMORY FULL, an error tone sounds, and you will not be able to store a new number until you delete a stored number.
Store a Number/Name in the Directory
1.Press PROG. The screen displays DIRECTORY.
2.Press SELECT. The screen displays ENTER NAME.
3.Using the chart on page 14, enter up to 15 characters for the name you’re storing with the number. Use 
to backspace and make corrections; use 
or 
to advance and add a space.
4.When you finish entering the name, press SELECT. The screen displays ENTER NUMBER.
5.Enter the telephone number. Use 
to backspace and make corrections. Press REDIAL/PAUSE to store a pause in the dialing sequence.
Press REDIAL/PAUSE if you wish to display and then store the last number dialed.
6.Press SELECT. The screen displays DISTINCT RING? and the current setting.
7.Press 
or 
to change the setting. Choose Y (for yes) if you wish the phone to alert you to calls from this number by changing to a distinctive ringing pattern after the first ring.
Choose N for a normal ringing pattern.
8.Press SELECT to confirm your selection. If you chose Y, a D will be displayed with the directory entry.
16 BASIC OPERATION | www.vtechphones.com |