Installation
Wall Mounting
Your phone base unit is designed to mount on a standard telephone wall plate. Wall mounting is optional.
1.Run the power and telephone cords through the slot, then connect them to the jacks located on the underside of the base.
2.Plug the AC adaptor into an electrical outlet. If the battery has not been previously charged, place the handset in the base, and allow it to charge at least 16 hours (or overnight). Connect the telephone line cord to the wall jack.
3.Mount the base on the wall. Position the base unit so the mounting studs will fit into the holes on the wall mount bracket. Slide the base unit down on the mounting studs until it locks into place.
GETTING STARTED | www.vtechphones.com |