VTech t2340 warranty Batteries, Operation Operating time

Page 22

If you repeatedly get a low battery indicator, even after charging overnight, the battery should be replaced.

To reduce the risk of fire or injury to persons or damage to the telephone, charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in the user’s manual.

Battery power is consumed whenever the handset is off the base unit or charger, even when the handset is not in use. The longer you leave the handset off the base unit or charger, the shorter you can actually talk on the handset. Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use.

Once the battery is fully charged, you do not have to charge it again until

BATTERY LOW is displayed

or flashes. This will maximize the battery life.

Batteries

Battery Care and Maintenance

After your battery is fully charged, you can expect the following performance:

Operation

Operating time

While in use (talking)

up to 4 hours

 

 

While not in use (standby*)

up to 4 days

 

 

* Handset is off the base unit or charger but not in use.

The battery needs charging when:

A new battery is installed in the handset.

The phone beeps twice every five seconds.

The screen displays BATTERY LOW and the low battery icon.

Place the handset in the base. The battery is typically fully charged at least 16 hours.

You can keep the battery fully charged by returning the handset to the base after each use.

Replacing the Handset Battery

1. Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward.

2.Lift out the old battery and disconnect.

3.Align the two holes in the new battery’s plug with the socket pins,

 

and snap the plug into place. Snap the battery in the compartment,

 

 

as described in Installation, on page 4.

 

4.

Replace the cover by sliding it up into place.

 

5.

The new battery must be charged before using the phone. Place the

 

 

handset in the base and allow it to charge for at least 16 hours the

“CLICK”

 

first charge. The telephone might operate before that, but for best

 

performance, let the battery charge fully.

22 BASIC OPERATION

www.vtechphones.com

Image 22
Contents Table of Contents Need HELP? Before You Begin Parts Check listInstallation Choose LocationTable/Desk Installation Standard electrical outletWall Mounting Charge the Handset Battery Set LanguageIf you subscribe to DSL service Set Handset Date and TimeTelephone Operation Handset OperationBase Operation Locate HandsetTemporary Tone Dialing Operating RangeCall Forward Display Screen Messages Screen Displays WhenSpeed Dialing Store a Number/Name in Speed DialPress Once Twice 3 Times 4 Times 5 Times 6 Times Dial a Speed Dial Number Edit a Number/Name in Speed DialDelete a Number/Name in Speed Dial Reassign Locations in Speed DialTelephone Directory Store a Number/Name in the DirectoryEdit a Number/Name in the Directory Delete a Number/Name in the DirectoryDial a Number from the Directory Move a Number/Name to the MemoryCaller ID Operation Review Call History About Call History Caller IDDelete Records from Call History Dial a Displayed Number Store a Call History Record in the DirectoryBatteries Operation Operating timeTroubleshooting Problem SuggestionCannot dial out CAN’T Connect Get noise, static, or Troubleshooting My calls fade or cut For this to take place Maintenance Warranty StatementHow do you get warranty service? Important Safety Instructions FCC, Acta and IC RegulationsFCC Part 68 and Acta Industry Canada Rbrc Seal Rbrc SealTechnical Specifications Index Off91-000439-040-000 User’s Manual