VTech Mi6821 user manual Case Of Difficulty, Phone Doesn’t Work At All, No Dial Tone

Page 26

Additional Information

In Case Of Difficulty

If you have difficulties in operating your phone, the suggestions below should solve the problem. If you still have difficulties after trying these suggestions, call VTech Commu- nications at 1-800-595-9511. In Canada, call VTech Telecommunications Canada Ltd. at 1-800-267-7377.

The Phone Doesn’t Work At All

Make sure the power cord is plugged in.

Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall jack.

Make sure the battery is properly charged. If you get a LOW BATTERY message or indication, the battery needs to be charged.

No Dial Tone

First check all the suggestions above.

If you still don’t hear a dial tone, disconnect the base unit from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the pro- blem is in your wiring or local service. Contact your local telephone company.

You Get Noise, Static, Or A Weak Signal Even When You’re Near The base unit

Household appliances plugged into the same circuit as the base unit can sometimes cause interference. Try to move the appliance or the base unit to another outlet.

You Get Noise, Static, Or A Weak Signal When You’re Away From The base unit

You may be out of range. Either move closer to the base, or relocate the base unit.

The layout of your home may be limiting the range. Try to move the base unit to another position.

The Handset Does Not Ring When You Receive A Call

Make sure you have the ringers activated.

Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack. Make sure the power cord is plugged in.

You may be too far from the base unit.

You may have too many extension phones on your telephone line to allow all of them to ring. Try to unplug some of the other phones.

You Hear Other Calls While Using Your Phone

Disconnect your base unit from the telephone jack, and plug in a corded tele- phone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company.

You Hear Noise In The Handset, And None Of The Keys Or Buttons Work

Make sure the power cord is plugged in.

25

Image 26
Contents USER’S Manual Important Safety Instructions Introduction Parts Check List Handset Layout Base Unit Layout Installation of Battery SetupConnecting power to Base Unit Checking for Dial Tone Charging of the Handset BatteryConnecting to Phone Line Setup Wall Mounting Handset and Base Indicators Icon DescriptionHandset Operation Intercom Call Temporary ringer adjustmentsMute Function Base Operation Call ForwardConference Call Phonebook Operation Storing a New EntryKey Basic Reviewing/Dialing from the PhonebookDelete a Phonebook Entry Dialing from the Phonebook page 15 toReviewing Caller ID Calls Log Caller ID Call WaitingCaller ID Call Waiting ID Storing a Caller ID Dialing from Caller IDDeleting Caller ID Key to Ringer Volume Handset SettingsRinger Volume Key Tone preset to onMessage Waiting Language preset to EnglishDial Type preset to Tone Clear Message Waiting Handset Settings Belt Clip Headset OperationHeadset Operation Maintenance Case Of Difficulty Handset Does Not Ring When You Receive a CallYou Hear Other Calls While Using Your Phone Phone Doesn’t Work At AllCommon Cure For Electronic Equipment How long is the limited warranty period? Warranty StatementWhat does this limited warranty cover? What is not covered by this limited warranty?How do you get warranty service? Other LimitationsFCC Part 68 and Acta FCC, ACTA, and IC RegulationsFCC Part Repair instructions Product identifier and REN informationConnection and use with the nationwide telephone network Rights of the telephone companyProgramming/testing of emergency numbers IC Industry CanadaFCC, ACTA, and IC Regulations Technical Specifications Nominal Effective RangeTable Of Contents Advanced Operation Headset Operation Additional Information ISSUE0 Need HELP?