VTech 2420 Case Of Difficulty, Phone Doesnt Work At All, No Dial Tone

Page 29

In Case Of Difficulty

If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTECH Communications at 1-800-595-9511. In Canada, call VTECH Electronics at 1-800-267- 7377.

The Phone Doesn't Work At All

•Make sure the Power Cord is plugged in.

•Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone wall jack.

•Make sure the batteries are properly charged. If the 'LOW BATTERY' message is shown, the battery pack needs charging.

No Dial Tone

•First check all the suggestions above.

•If you still don't hear a dial tone, disconnect the Base Unit from the telephone jack and connect a different phone. If there is no dial tone on that phone either, the problem is in your wiring or local service. Contact your local telephone company.

You Get Noise, Static, Or A Weak Signal Even When You're Near The Base Unit

•Household appliances plugged into the same circuit as the Base Unit can sometimes cause interference. Try moving the appliance or the Base Unit to another outlet.

You Get Noise, Static, Or A Weak Signal When You're Away From The Base Unit

•You may be out of range. Either move closer to the Base, or relocate the Base Unit.

•The layout of your home may be limiting the range. Try moving the Base Unit to another position.

The Handset Does Not Ring When You Receive A Call

•Make sure you have the Handset ringer activated. To set the ringer, see HANDSET SETTINGS and BASE SETTINGS.

•Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone jack. Make sure the power cord is plugged in.

•You may be too far from the Base Unit.

•You may have too many extension phones on your telephone line to allow all of them to ring. Try unplugging some of the other phones.

29

Additional Information

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Important Safety Instructions Page Introduction Parts Check List Handset Layout Base Unit Layout Connecting to phone line SetupInstallation of Battery Pack in Handset Charging Of Handset Battery Pack Wall Mounting Setup Of The 2420 Accessory Handset Registration and Operation of the VT2420 Accessory HandsetEnter Base ID Code Registration and OperationHandset Icons Handset and Base IndicatorsBase Leds Handset LEDsRDL Redial Soft Menu FunctionsFrom the idle OFF mode, press Menu Calls Log Caller IDRinger Volume Handset SettingsRegister Range ExtenderMEM Memory To Store a Number/Name To Delete a Number/Name To Search For and Dial a Number/ NameDial a Name/Number, locate the entry you want to edit To Edit a Number/NameHandset Operation Page/Intercom Handsfree Speakerphone Operation Low Battery IndicationLine in Use Indication Message Waiting IndicationTransferring Calls Conference CallingOperation Headset OperationAdditional Information MaintenanceCase Of Difficulty Handset Does Not Ring When You Receive a CallPhone Doesnt Work At All No Dial ToneCommon Cure For Electronic Equipment You Hear Other Calls While Using Your PhoneWhat does this limited warranty cover? Warranty StatementHow Long is the limited warranty period ? What is not covered by this limited warranty ?Other Limitations Additional Information Warranty StatementHow do you get warranty service? VTech Communication Inc FCC and IC RegulationsIC Industry Canada Additional Information FCC and IC RegulationsFCC Part Rbrc R Seal Nominal Effective Range Technical SpecificationsTable Of Contents Issue

2420 specifications

The VTech 2420 is a versatile cordless phone system that combines modern technology with user-friendly features, delivering a reliable communication solution for today's households. This phone model is designed for those seeking clarity in conversations, ease of use, and practicality in daily functions. With its sleek design and a range of functionalities, the VTech 2420 stands out as a top choice for both home and small office environments.

One of the main features of the VTech 2420 is its cordless capability, allowing users the freedom to move around while on calls. The phone operates on a robust DECT 6.0 technology, which enhances security and range. This digital enhancement not only provides crystal-clear audio quality but also minimizes the risk of interference from other wireless devices in the vicinity.

The VTech 2420 boasts an intuitive interface, making it easy for users of all ages to navigate through its features. The illuminated keypad and large, easy-to-read display facilitate effortless dialing and message checking, even in low-light conditions. The phone is equipped with a built-in answering system that can store up to 14 minutes of messages, ensuring that users never miss important calls or communications.

Another noteworthy characteristic of the VTech 2420 is its expandable nature. Users can easily add up to five additional handsets to the system, creating a tailored communication setup for larger homes or offices without the need for additional phone jacks. This flexibility allows for seamless intercom communications and call transfers between handsets.

In terms of battery life, the VTech 2420 is equipped with rechargeable batteries that provide extensive talk and standby time. The energy-efficient design not only ensures that the phone remains operational for long periods but also contributes to reducing environmental impact.

Finally, the VTech 2420 includes essential features like call waiting, caller ID, and a 30-name and number phonebook. These aspects enhance user experience by streamlining how individuals connect and communicate. Overall, the VTech 2420 combines practicality, advanced technology, and ease of use, making it an excellent option for those seeking a dependable and functional cordless phone system.
Top Page Image Contents