VTech CS6719 CS6719-15 CS6719-16 CS6719-2 user manual Charge the battery, No battery

Charge the battery

Place the handset in the telephone base or the charger to charge.

Once you have installed the battery, the handset LCD display indicates the battery status (see the table below).

NOTES

•For best performance, keep the handset in the telephone base or charger when not in use.

•The battery is fully charged after 12 hours of continuous charging.

•If you place the handset in the telephone base or the charger without plugging

in the battery, the screen displays

No battery.

		Battery	Battery	Action
	indicators		status
The screen			The battery	Charge
is blank, or			has no	without
shows Put			charge or	interruption
in charger			very little	(at least 30
and			charge. The	minutes).
flashes.			handset
			cannot be
			used.
The screen			The battery	Charge
shows Low			has enough	without
battery and			charge to be	interruption
		flashes.	used for a	(at least 30
			short time.	minutes).
The screen			The battery is	To keep
shows			charged.	the battery
HANDSET X.				charged,
				place it in the
				telephone
				base or
				charger when
				not in use.

When it is fully charged, you can expect the following performance:

Operation	Operating time
While in handset	Seven hours
use (talking*)
While in	Three hours
speakerphone
mode (talking*)
While not in use	Five days
(standby**)

*Operating times vary depending on your actual use and the age of the battery.

**Handset is not charging or in use.